• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 83 subscribers
  • Views 806 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Controller for DTC of induction motor.

NISHANT KADAM
Prodigy 20 points
Other Parts Discussed in Thread: TMS320F28379D, LAUNCHXL-F28379D, TMDSDOCK28379D, TMDXIDDK379D, C2000WARE-MOTORCONTROL-SDK

I am doing a project on direct torque control of induction motor but i don't know which controller to use. Can someone help me with that.

  • 0
    TI__Expert 4200 points

    Hi,

    Are you looking for a specific MCU for induction motor control or a specific compensator (PI, PR, Repetitive, etc).

    I guess you are looking for the right MCU for your application but I just want to make sure.

    Best

    John

  • 0 in reply to John_K
    Prodigy 20 points

    I am looking for MCU. There are so many MCU available and I am confused which one to use.

  • 0 in reply to NISHANT KADAM
    TI__Guru** 119680 points

    hello

    we don't offer any DTC software examples (this is an ABB technique).

    for R&D type of projects most people would use our highest end processor with most MIPS and memory. That would be TMS320F28379D and EVMs are available TMDSDOCK28379D or LAUNCHXL-F28379D depending on how you want to interface to your power stage.

    TMDXIDDK379D is a high-voltage 3-ph inverter with an F28379D controlCARD and encoder based FOC examples from C2000Ware-MotorControl-SDK

    There are also low voltage BoosterPacks that work with the LaunchXL, examples also in the SDK.

    good luck