CCS/TMS320F280049: tmdshvmtrinspin

makan

Part Number: TMS320F280049
Other Parts Discussed in Thread: TMDSHVMTRINSPIN

Tool/software: Code Composer Studio

Do we need extra signals other than following signals into the 280049c controlcard to drive a PMSM motor in tmdshvmtrinspin kit of motorcontrol_sdk?

6 PWM outputs

4 ADC voltage sensing input

3 ADC current sensing input

1 output enable

1 input fault trip

Thanks

over 5 years ago

0 Yanming Luo over 5 years ago

TI__Guru** 115650 points

Right. Controling hv kit must have these signals, the outpu enable signal is used to cleat the fault. You might download and refer to the example lab in motorControlSDK as the following link.

MotorControl software development kit (SDK) for C2000™ MCUs

http://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

0 makan over 5 years ago in reply to Yanming Luo

Intellectual 390 points

Thank you Yanming for the quick reply

Actually I am using the example codes and investigated a lot and I have assembled my own pcb and working on it, but as I am new to motorcontrol_sdk I wanted just to get your quick answer.

Thank you and kind regards

0 Yanming Luo over 5 years ago in reply to makan

TI__Guru** 115650 points

Good. These signals are must-have for your own board also.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F280049: tmdshvmtrinspin