2802x page wait states

Clark Molster said:

Hi Champs,

Page 120 of the 2802x data sheet explains that flash page wait states must be >= 1, however page 21 of 'System Control and Interrupts Guide' shows that wait state value = 0000 is valid for paged accesses.  If SYSCLKOUT < 25 MHz, can 'PAGEWAIT' = 0000?

Thanks for helping.

Cheers,

Clark

Clark,

PAGED can be 0 on 2802x.   (It had to be  > = 1 on 2833x - looks like this is a leftover from that device).  The wait state table on page 21 is correct.

I'll feed this back to the data manual owners.

-Lori