Part Number: TMDSHVMTRINSPIN
Dear TI support engineer,
We are trying to design a series of servo motor drives in position control mode and we found out the Texas instruments InstaSPIN-MOTION MCU's with the above HV-kit would help us to minimize the design efforts and release to market time very effectively.
The problem is the servo motors that we are concentrated on as our Target servo motors are mostly high voltage and high current motors, say 350V, and currents up to 50 amps., and a nominal power of up to 6kW.
The question is how this HV-kit might help us on our project and if there is any alternative kit suitable for our project.
Beast regards
Adel Najafi
