I need IBIS mode for TMS320C6211B

user6321188

Prodigy 30 points

Other Parts Discussed in Thread: TMS320C6211B

I need to download the IBIS model for the dsp : TMS320C6211B for a simulation of my prototype circuit board.

I checked it on TI homepage , but the link of ibis model was not described.

If you have, please share me.

Thanks.

over 5 years ago

0 Rex Chang over 5 years ago

TI__Guru 50170 points

Hi,

I found in the product page under Technical Document an AppNote "Using IBIS models for Timing Analysis". Is this what you want?

https://www.ti.com/lit/an/spra839a/spra839a.pdf

It is a very old device, and as mentioned in the product page that no design support for it. If you don't find the info you need in the product page, most likely, we don't have it either.

Rex

0 Mukul Bhatnagar over 5 years ago

TI__Guru* 85185 points

Unfortunately if you do not see it on ti.com product folder for 6211 , it is likely that we do not have it.

These are older devices, so it is possible that we may have not offered IBIS for these.

Sorry for not being much help.

Regards

Mukul

C2000™︎ microcontrollers

C2000 microcontrollers forum

I need IBIS mode for TMS320C6211B