TMS320F28069: C28x and CLA control routine

Arash Tahghighi

Part Number: TMS320F28069
Other Parts Discussed in Thread: POWERSUITE

Hi every body

I am going to build a buck converter and use digital control library for making the controller.

is there any simple example about using digital control library to implement a PID controller in c28x and CLA.

basically I want to know how to use digital control library in c28x and CLA. how to pass parameter to asm code in CLA and etc.

thanks in advance

over 5 years ago

0 Richard Poley over 5 years ago

TI__Mastermind 27200 points

There is a PI controller example which runs on the CLA on this device in the DCL examples folder. I think that's the closest we have. The controller runs on the CLA while the inputs and output are passed to/from the main CPU. It should be pretty clear how it's done from that example.

There is a DC/DC buck converter in powerSUITE which I think uses a PID controller from the DCL on the CPU. Details of the kit are here:
http://www.ti.com/tool/TIDM-DC-DC-BUCK

It should be straightforward to stitch together what you want to do from these two examples. I hope this helps. Feel free to post back if you get into difficulty.

Regards,

Richard

0 Arash Tahghighi over 5 years ago in reply to Richard Poley

Intellectual 610 points

Thanks Richard

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069: C28x and CLA control routine