TMS320LF2407A: tms320lf2407 MCU program

FRANK1

Expert 8845 points

Part Number: TMS320LF2407A

Greetings,

I'm wondering if I can use the approach from

to program tms320lf2407 microcontroller.

Thank u.

Regards,

sprabv4c.pdf

over 5 years ago

0 Sira Rao80 over 5 years ago

TI__Mastermind 27225 points

Please give me a day or so to look into this and/or consult with an expert who can answer this question.

Thanks,

Sira

0 FRANK1 over 5 years ago in reply to Sira Rao80

TI__Expert 8845 points

OK, waiting your feedback.

Thanks

0 FRANK1 over 5 years ago in reply to Sira Rao80

TI__Expert 8845 points

Hi，

is there any update on this?

Thank you.

0 Sira Rao80 over 5 years ago in reply to FRANK1

TI__Mastermind 27225 points

Mark,

Sorry, I've asked for the ticket to be re-assigned. I couldn't come up with an effective answer for you.

Thanks,

Sira

0 Hareesh Janakiraman over 5 years ago

TI__Guru* 95315 points

The general concept is the same, but a good part of the app.note (specifically relating to the H/W resources on the chip) is NOT applicable to LF2407A, which is almost two decades old now. Serial port programming solutions are available from 3rd parties already. Exactly what are you trying to do?

0 FRANK1 over 5 years ago in reply to Hareesh Janakiraman

TI__Expert 8845 points

Thank you for your response.

I do not know what our customer trying to do, please let me confirm it.

0 FRANK1 over 5 years ago in reply to Hareesh Janakiraman

TI__Expert 8845 points

I will guide our customer to communicate with this problem.

Thank you so much.

0 Nikodem Mazur over 5 years ago

Prodigy 20 points

Hi all,

I need to program LF2407A via serial communication on Windows 7/10.

The dedicated programming utility tool from

works only on Win 95/98 as the description states.

Could you name any of third parties offering solutions for the programming?

Nikodem Mazur

0 Hareesh Janakiraman over 5 years ago in reply to Nikodem Mazur

TI__Guru* 95315 points

LF240xA devices are almost two decades old now. The entire toolchain for these devices is now obsolete and there is very limited support for these devices (mostly through e2e). If you are starting a new project, I encourage you to look at newer C2000 devices.

These two 3rd parties have programming solutions for LF240xA devices:

https://www.elprotronic.com/collections/c2000

https://www.codeskin.com/programmer

You may find the attached document beneficial.

6648.Codeskin.pdf