CCS/LAUNCHXL-F28027F: Can't find information to programm f28027f and drv8323rs

Alexander Burger

Tool/software: Code Composer Studio

Hello,

After working through the proj_labs and adjusting the user.h for my motor, I don't know how to programm f28027f and drv8323rs to work independly without a pc.

I searched the internet for information but I cant find any.

I want to programm f28027f and drv8323rs to rotatet my motor, can i do this with the proj_labs or do i need to use the examples for the f28027f (EPwmUpDownAQ)

And is there any information about it?

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 117160 points

Please see the following link for f28027f and drv8323rs.

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/635499

Please see the following links for code running standalone from flash.

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/807050

https://e2e.ti.com/support/tools/ccs/f/81/t/781739

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/247288

0 Alexander Burger over 6 years ago in reply to Yanming Luo

Intellectual 670 points

Thanks for your help,

Is there any other information about controlling a motor from flash or example codes?

0 Yanming Luo over 6 years ago in reply to Alexander Burger

TI__Guru** 117160 points

Please take a look at those links mentioned above that should be helpful to you. And if you haven't had a chance to look at the workshop material, I think this will help demystify some of the terminology and architecture as well.

http://processors.wiki.ti.com/index.php/C2000_Archived_Workshops

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28027F: Can't find information to programm f28027f and drv8323rs