TMS320F28069: Can I use Boot Mode Selection GPIO'S for Normal Operation?

mihir dave

Expert 1025 points

Part Number: TMS320F28069

Hi,

I am working on TMS320F28069 Experimenters Kit in Get Mode, in which boot mode selection pin has to be pulled high .

So, Now can i use those gpio(Boot Mode Selection) for normal operation for ,example:Driving Led?

Thank you

Your Faithfully

Mihir Dave

over 6 years ago

0 Baskaran Chidambaram over 6 years ago

TI__Genius 17370 points

for boot mode selection you need to pull up / down the signal. in that case you wont be able to driver the LED ON/OFF.

If you want to keep the LED always ON you can do that.

0 Baskaran Chidambaram over 6 years ago in reply to Baskaran Chidambaram

TI__Genius 17370 points

i checked with experts in our team and the feedback i got is that you will still be able to drive the pin high/low. So you will be able to use the same pin for driving LED.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069: Can I use Boot Mode Selection GPIO'S for Normal Operation?