CCS/TMS320F28374D: DEBUG error -2060 @ 0x0 can't run target CPU on CLA

Colombo Carlo

Mastermind 23285 points

Part Number: TMS320F28374D

Tool/software: Code Composer Studio

Hi everybody ,

I m on control card , and using as SW 379D workshop code , lab 9 .

now I can load CLA OK , but in debug I get the error as in subject , what can I do ?

in attach a doc file with screenshotsCLA.docx

best regards

Carlo

over 5 years ago

0 Lori Heustess over 5 years ago

TI__Guru* 90955 points

Carlo,

The screenshot shows the Debug window has CLA selected. CLA can't be "run" from the debugger unless it is already triggered and halted at a breakpoint. To order to start CLA execution from an idle state a peripheral or a SW write to the force register must trigger it.

Please see this related post:

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/589162?RTOS-TMS320F28377D-after-connect-CLA-of28377d-load-symbol-error

Debug tips in the CLA Software Development Guide may help as well:

https://software-dl.ti.com/C2000/docs/cla_software_dev_guide/debugging.html

Regards

Lori

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28374D: DEBUG error -2060 @ 0x0 can't run target CPU on CLA