CCS/TMS320F28379D: generating analog output through simulink

asif hasan

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

I am generating a sample based sine wave using sine wave block of simulink and connecting it to DAC block of the embedded support package. The target pin is DAC OUT A J3 30. My simulink modelis running, building and generating the code, but i am not getting any output at J3 30 pin.

over 6 years ago

0 Santosh Jha over 6 years ago

TI__Guru 50611 points

Hi Arif,

Can you run C2000ware driverlib DAC example and check if it working well before we go to MathWorks teams for Simulink model?

0 asif hasan over 6 years ago in reply to Santosh Jha

Prodigy 30 points

Dear sir,

I searched for DAC example in in C2000ware library but unable to find it. I searched in "Software/C2000ware (3.02.00.00)/english/F2837XD/CPU1". I hace many examples there but not able to find the DAC example.

0 Santosh Jha over 6 years ago in reply to asif hasan

TI__Guru 50611 points

Hi Asif,

If you have downloaded and installed C2000ware, then you can find the examples at:

C:\ti\C2000\C2000Ware_3_02_00_00\driverlib\f2837xd\examples\cpu1\dac

0 Santosh Jha over 6 years ago in reply to Santosh Jha

TI__Guru 50611 points

Asif,

Any update on the issue? Is it resolved?

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28379D: generating analog output through simulink