• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 554 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28388D: - EtherCAT Master Stack implementation

Eric MEURVILLE
Prodigy 250 points
Part Number: TMS320F28388D

Good morning, 

Is there an EtherCAT Master Stack available from TI or third parties for the TMS320F28388D platform? If not, could you recommend alternative solutions from TI? 

Thanks! 

EMe

  • 0
    TI__Mastermind 30255 points

    Hello

    Just to clarify F28388D only supports being EtherCAT slave but should be able to work with any standard EtherCAT master on a network. 

    In terms of EtherCAT master, if you're looking for the stack you'll have to contact the 3rd party for the master you're using. 

    We've tested with Beckhoff TwinCAT as well as Acontis EC-Engineer. You can check out those.

    Also, if you're looking for an embedded platform to run EtherCAT master, you can check out the TI Sitara Processors. 

    Best regards

    Chris

  • 0 in reply to Christopher Chiarella
    Prodigy 250 points

    Thanks Chris! 

    Have a good day and Best regards, 

    Éric.