TMS320F28069M: Which Isolator IC to use for interfacing "USB" with "Launchpad" using "D+" & "D-" pinout.

mihir dave

Expert 1025 points

Part Number: TMS320F28069M
Other Parts Discussed in Thread: TMS320F28069, TPD2E2U06, TPD1E05U06

Hi,

I am planning to interface USB to TMS320F28069 through "GPIO 26 & 27" .

So, anybody can recommend me the best "ESD" protection isolator IC ?

I came across "USBLC6-2S".

Thank you

Your Faithfully

Mihir

0 Cody Watkins over 4 years ago

Mihir,

The document above recommends a number of ESD solutions for USB on Page 5.

TPD1E05U06 and TPD2E2U06 are 2 of the recommended solutions.

If you need more info on these products we can move this thread over to that forum.

Regards,
Cody

0 mihir dave over 4 years ago in reply to Cody Watkins

Expert 1025 points

Hi Cody,

Thanks for recommending those IC's I further planning to design testing USB interfacing pcb.

So, can I apply for sample?

Thank you

Your Faithfully

Mihir

0 Cody Watkins over 4 years ago in reply to mihir dave

Mihir,

Please go thorugh the following link to begin to order sampels. Not all TI devices are available as samples, but i suspect these ones should be.

Regards,
Cody

0 mihir dave over 4 years ago in reply to Cody Watkins

Expert 1025 points

Hi Cody,

Thank you, I will proceed with That.

Thank you

Your Faithfully

Mihir

C2000 microcontrollers forum