CCS/TMDXIDDK379D: TMDXIDDK379D-MTR-BNDL

User 650652049

Tool/software: Code Composer Studio

I just ordered C2000 DesignDRIVE Development Kit for Industrial Motor Control TMDXIDDK379D-MTR-BNDL:. Will the controller TMDSCNCD28379D automatically identify all needed motor parameters and give us a tuned and stable commutation and torque control just like TMDSCNCD28069MISO controlCARD with DRV8301board. Please help.

Also, please suggest examples to run BLAC motors with the F28379D controller. Thank you

over 6 years ago

0 Ramesh Ramamoorthy over 6 years ago

TI__Mastermind 27240 points

No, the example project source code is all open and the parameters are tuned for the motor. Parameter identification and self tuning is not part of this example.

0 User 650652049 over 6 years ago in reply to Ramesh Ramamoorthy

Intellectual 525 points

Thanks for the response. Is there a controller like f28069 card for blac motor control which identifies the parameters of the motor automatically?

If not available, please provide example to tune the motor. Please help me how to identify parameters of the motor automatically? Is this possible?

0 Ramesh Ramamoorthy over 6 years ago in reply to User 650652049

TI__Mastermind 27240 points

You can consider TMDSCNCDF280049c control card for parameter ID and this MCU is capable.

You may have to refer to some text books or other publications for literature on parameter identification.

0 User 650652049 over 6 years ago in reply to Ramesh Ramamoorthy

Intellectual 525 points

Thanks a lot for the info. Can F280049C be used with TMDXIDDK379D kit?

0 Ramesh Ramamoorthy over 6 years ago in reply to User 650652049

TI__Mastermind 27240 points

Yes, the control cards are compatible for the critical functions needed.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMDXIDDK379D: TMDXIDDK379D-MTR-BNDL