• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 82 subscribers
  • Views 386 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F2812: Could TMS320F2812 control GigE industrial camera through Ethernet port ?

user6415732
Prodigy 90 points
Part Number: TMS320F2812
Other Parts Discussed in Thread: TMDSCNCD28388D

Tool/software: Code Composer Studio

Could  TMS320F2812 control GigE industrial camera through Ethernet port

We need some CCS codes or methods to connect GigE camera through the Ethernet port of TMS320F2812 development board, to control it to collect photos and store photo data in the register of development board. MightI ask you guys, is there a feasible way?

  • 0
    TI__Mastermind 42195 points

    User6415732,

    I don't know of any TMS320F2812 development board that has Ethernet. What development board are you using?

    TMDSCNCD28388D had ethernet and is a more modern version of the F2812 device you have mentioned. If your camera works over ethernet then you can likely make this hardware work.

    Please note that you will be writing C code. And you may need to find an external memory to store the photos on...say maybe a uSD card, just FYI there is a microSD card slot on the TMDSCNCD28388D.

    Best of luck,
    Cody

  • 0 in reply to Cody Watkins
    Prodigy 90 points

    There is Ethernet port on F28335, but it is 100m, not Gigabit. Excuse me, GigE this kind of gigabit network camera can be connected to 28335 100M Ethernet port to work normally?

  • 0 in reply to user6415732
    TI__Mastermind 42195 points

    What development board are you using?

    user6415732 said:
    Excuse me, GigE this kind of gigabit network camera can be connected to 28335 100M Ethernet port to work normally?

    That would be a question of if the GigE supports 100M networks, which I suspect it does.

    Regards,
    Cody

  • 0 in reply to Cody Watkins
    TI__Mastermind 42195 points

    Have you resolved your issue? Again I am not aware of F28335 or F2812 EVMs which support ethernet.

    Regards,
    Cody