CCS/TMS320F28335: CCS

rajesh beesetty

Tool/software: Code Composer Studio

Hello All,

As of now I don't have a TMS320F8335 board but want to debug my code written on CCS for micro-controller and check whether the outputs(PWM,GPIO) are coming as expected.

But When I run the program written on CCS, It says "Can't coonect to JTAG/Device".

Please do needful.

over 5 years ago

0 Lori Heustess over 5 years ago

TI__Guru* 93800 points

Hello Rajesh,

There isn't a simulator available to allow you to run the code without an actual device. Unfortunately you will need a board in order to run the code.

For the F28335, you can find the Experimenter's Kit, at the bottom of the page under Hardware development: https://www.ti.com/product/TMS320F28335

Depending on your needs, you may also want to consider one of the newer devices, such as the F2837xD which has a low-cost launchpad https://www.ti.com/tool/LAUNCHXL-F28379D

Regards

Lori

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28335: CCS