C2000™︎ microcontrollers

C2000 microcontrollers forum

State TI Thinks Resolved
Locked Locked
Replies 4 replies
Answers 1 answer
Subscribers 82 subscribers
Views 355 views
Users 0 members are here

Support feedback

Options

Options

Related

CCS/DRV8312-C2-KIT: Changing current supplied to the board

Chloe Lui

Prodigy 30 points

Part Number: DRV8312-C2-KIT

Tool/software: Code Composer Studio

Hi,

I got the DRV8312-C2-KIT on my hand, if I want to connect the board to my own motor for my own application, could I change the supplied current in the CSS directly and simply to run my motor with a current amount that I want? If so, how to achieve that? and is there possibility to control the supplied current directly on the GUI? Thanks

over 5 years ago

0 Yanming Luo over 5 years ago

TI__Guru** 116090 points

You might take a look at the link below, select the appropriate software to run the motor based on the motor and the controlCard you have. And you can run the related project in CCS to change the torque current or speed to drive the motor.

0 Chloe Lui over 5 years ago in reply to Yanming Luo

Prodigy 30 points

Hi Yanming,

Many Thanks for your reply, could I have the link please? and about the appropriate software to run the motor, you mean the GUI (in the USB)?

Thanks

0 Chloe Lui over 5 years ago in reply to Yanming Luo

Prodigy 30 points

Hi Yanming,

Many Thanks for your reply, could I have the link please? and about the appropriate software to run the motor, you mean the GUI (in the USB)?

Thanks

0 Yanming Luo over 5 years ago in reply to Chloe Lui

TI__Guru** 116090 points

Sorry, please find the link below.

[FAQ]Getting Started with C2000 MCUs for Motor Control

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/864875?tisearch=e2e-sitesearch&keymatch=faq%3Atrue