LAUNCHXL-F28379D: Resetting the board

Danilo A.

Hi Team,

A customer loaded a code written for LAUNCHXL-F28379D on MATLAB. After loading the code, he can't reset the board. Is there other way he can reset the board?

Regards,

Danilo

over 5 years ago

0 KARTHIKEYAN RAJAMANICKAM over 5 years ago

TI__Genius 11645 points

Danilo,

Are you referring to the below post ?

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/937690

If yes please close this thread.

0 KARTHIKEYAN RAJAMANICKAM over 5 years ago in reply to KARTHIKEYAN RAJAMANICKAM

TI__Genius 11645 points

Pls confirm, so that we can close this thread.

0 Danilo A. over 5 years ago in reply to KARTHIKEYAN RAJAMANICKAM

TI__Mastermind 32645 points

Hi Karthik,

It seems this inquiry is from the same customer or team. I will confirm with the customer.

Regards,

Danilo

0 KARTHIKEYAN RAJAMANICKAM over 5 years ago in reply to Danilo A.

TI__Genius 11645 points

Thanks. Pls confirm and close this thread.

0 Danilo A. over 5 years ago in reply to KARTHIKEYAN RAJAMANICKAM

TI__Mastermind 32645 points

Hi Karthik,

I have checked the status of the board in another thread and noticed that the customer we able to reset the board with CCS. However another customer wants to reset the board using MATLAB and have consulted Mathworks regarding issue. The Mathworks team don't know how to address the problem. Can we ask help from our MATLAB experts how we can resolve this?

Regards,

Danilo

0 KARTHIKEYAN RAJAMANICKAM over 5 years ago in reply to Danilo A.

TI__Genius 11645 points

Not sure how much our team can support on this.

Please refer to the below FAQ's

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/484814

If this doesn't help, please open a new thread for further support.

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: Resetting the board