This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I have some problems with analog inputs, i can not define the pins on my ControlCard Docking.
The only one that i can define and test correctly is the pin 27 corresponds to ADCIN15.
I am working with an F28379D controlCARD.
Thank you in advance.
Rida
Hi,
One of our experts will get back to you by Tuesday, since Monday is a US holiday.
Rida,
I'm not an expert on simulink software, but lets verify that you are looking at the correct signals. ADCIN15 connects to all ADCs, so perhaps you are configuring the wrong ADC? Maybe you are even connecting the wrong pin, who knows.
Can you show the other ADC configuration that you are enabling in simulink? Also what debugging environment are you using? However you do it you need to verify that you can see the ADC result registers correctly converting input signals.
Can you send me a picture or describe how you are connecting the ADC channels during your tests?(both when using ADCIN15 and ADCIN0)
Regards,
Cody
Cody,
Thank you for answering me,
I think I resolved this issue by changing the SOCx, but what I need actually is, what is the link between SOCx and ADCINx ?
Thank you for advance.
Rida
Rida,
sorry for the slow response. There is a register which is responsible for this, but I am somewhat unsure how to change this configuration using the mathworks software.
I am sure there will be a way. If you are struggling with this configuration problem please contact mathworks support on their forum.
https://www.mathworks.com/matlabcentral/answers/?term=tag%3A%22C2000%22
Regards,
Cody