CCS/TMS320F28388D: F28388D controlCARD evaluation module

user6034716

Intellectual 600 points

Part Number: TMS320F28388D
Other Parts Discussed in Thread: CONTROLSUITE, C2000WARE

Tool/software: Code Composer Studio

Hi,

I've bought a F28388D controlCARD evaluation module as below. And my question is how to start it to learn F28388D?

https://www.ti.com/tool/TMDSCNCD28388D#technicaldocuments

There is no examples in controlsuite as other MCUs. And it's really difficult for a new user to learn this new MCU and EVM without any examples. Could you give some help? Thanks.

over 5 years ago

0 Santosh Jha over 5 years ago

TI__Guru 50611 points

Hi,

Please download and install C2000ware SDK. The SDK has multiple examples using DriverLib.

www.ti.com/.../C2000WARE

The examples are at:

C:/ti/c2000/C2000Ware_3_02_00_00/driverlib/f2838x/examples/c28x

0 user6034716 over 5 years ago

Intellectual 600 points

Hi,

I have some progress that I get some examples in C2000Ware.

But when I import these examples into CCS workspace , change nothing and built it, there are many abnormal errors.

0 user6034716 over 5 years ago in reply to Santosh Jha

Intellectual 600 points

Hi Santosh,

Actually, I'ved alread found C2000ware before your reply. And I have tried to import some examples into CCS workspace, but when I built these projects, it has many errors., shown below. Do I need to do something after the import?

0 user6034716 over 5 years ago in reply to Santosh Jha

Intellectual 600 points

I attached some pictures in these replies to show more information, but it does not show. I don't know why.

0 user6034716 over 5 years ago in reply to user6034716

Intellectual 600 points

0 Santosh Jha over 5 years ago in reply to user6034716

TI__Guru 50611 points

Hi,

I just tried the same project on my setup and it builds fine without any build issue.

What CCS version you are using? Also, can you send full build log?

0 user6034716 over 5 years ago in reply to Santosh Jha

Intellectual 600 points

Hi Santosh,

CCS Version: 10.1.0.00010

build log:

"../f2838x_sysctrl.c", line 1: warning #1269-D: null (zero) character in string or character constant
"../f2838x_sysctrl.c", line 1: warning #1269-D: null (zero) character in string or character constant
"../f2838x_sysctrl.c", line 1: error #8: missing closing quote
47 errors detected in the compilation of "../f2838x_sysctrl.c".
gmake: *** [f2838x_sysctrl.obj] Error 1
gmake: Target 'all' not remade because of errors.
**** Build Finished ****

Error log:

/empty_bitfield_project line 1 C/C++ Problem
#194-D unrecognized character escape sequence f2838x_gpio.c /empty_bitfield_project line 1 C/C++ Problem

For some reason, I could just copy some of them. Thanks!

0 user6034716 over 5 years ago in reply to Santosh Jha

Intellectual 600 points

I just built project for other sources, there is no error.

0 Santosh Jha over 5 years ago in reply to user6034716

TI__Guru 50611 points

Did it import the project correctly? Did you had any issue in importing?

May be you have some extra character in f2838x_sysctrl.c, Line#1

You can delete the project and re-import it again.

Also, you can try to import another example for F28388D

C:/ti/c2000/C2000Ware_3_02_00_00/driverlib/f2838x/examples/c28x/led/

0 user6034716 over 5 years ago in reply to Santosh Jha

Intellectual 600 points

Hi Santosh,

I've fixed this issue, thanks a lot!

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28388D: F28388D controlCARD evaluation module