Hi Team,
A customer wants to confirm if he can use LAUNCHXL-F280049C together with BOOSTXL-DRV8323RS. Do we have a list of launchpads with their compatible booster pack or other boards?
Regards,
Danilo
Hi Danilo,
From a hardware perspective the two boards are not compatible by default, mainly due to the F28004x's PGA_GND pin being on the Boostxl-drv8323x's VSENVM pin. You will need to remove resistor R23 or R24 of the F28004x LaunchPad to disconnect VSENVM from the PGA_GND, or risk damaging the device.
Other than that, there are some other signals missing at the F28004x LP headers for the DRV8323x board. These include ENABLE, nFAULT, IDRIVE, VDS, and HALLB. I'm not sure if all of these are required signals to use the DRV board and you may be able to get away with jumping signals from other LaunchPad headers, as described in https://e2e.ti.com/support/motor-drivers/f/38/t/882294
I'd recommend taking a look at the BOOSTXL-DRV8320RS board instead, since it is directly compatible with the F28004x LaunchPad and there is SW support within the C2000WARE-MOTORCONTROL-SDK.
Best,
Kevin
