CCS/TMS320F28027F: Read from an external ADC parallel port ADS1605

Joaquin Lopez contreras

Part Number: TMS320F28027F
Other Parts Discussed in Thread: ADS1605,

Tool/software: Code Composer Studio

Dear all,

I am working in a project where I need an external ADC, 16bits 5Msps as ADS1605. The datasheet of ADS1605 recomends to use TMS320C6000 family to do this task but it seems to be very complex.

I wonder if TMS320F28027F, or any similar part, would be able to read from the parallel port of ADS1605. Does anyone have experience in this? How should I use the TMS320F28027F for this task?

Any suggestion or recommendation would be wellcome.

Thanks in advance,

Joaquin.

over 4 years ago

0 Vivek Singh over 4 years ago

TI__Guru** 113035 points

Hi Joaquin,

TMS320F28027F does not have parallel interface. Please look at TMS320F28075 device which has EMIF interface and that can be used for this.

Regards,

Vivek Singh

0 Joaquin Lopez contreras over 4 years ago in reply to Vivek Singh

Intellectual 440 points

Hi Vivek,

Thank you very much for your support.

Is there any Application Note or example to see how to do it?

Thanks in advance,

Joaquin.

0 Marlyn Rosales Castaneda20 over 4 years ago in reply to Joaquin Lopez contreras

TI__Mastermind 22835 points

Hi Joaquin,

We do not have any documentation specific to interfacing with the ADS1605 device, but we have an application report, Design and Usage Guidlines for the C2000 External Memory Interface (EMIF), that would help you understand EMIF.

Best Regards,

Marlyn

0 Joaquin Lopez contreras over 4 years ago in reply to Marlyn Rosales Castaneda20

Intellectual 440 points

Hi Marlyn,

Thank you very much for your support.

Regards,

Joaquin

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28027F: Read from an external ADC parallel port ADS1605