TMS320F28335: TMS320F28335 eZdSP KIT communication through MCBSP

Hi Team, 

I have following customer request, can you please advise:

"

We want to read the position from the encoder (Netzer DS-25) by using ssi or biss-c protocol in the dsp we used (TMS320F28335 eZdSP KIT).

We confirmed that it works on the computer using RS422 with the encoder and sends location information. When we examine it on the interface, the encoder gives ssi or biss-c protocol output.

To use ssi or biss-c in our own dspm, we need a program sample and documentation.

Texas Inst. When we examine the page, TMS320F28377D dsp documents come out. When we examined the gpio pins found in TMS320F28377D, the dsp (TMS320F28335 eZdSP KIT) we used does not match. Is it possible to communicate with the Netzer encoder using the Multichannel Buffered Serial Port (MCBSP) protocol?

"

Thanks in advance

Best Regards

Furkan Sefiloglu