TMS320F28035: How to get the SCI message from the TX and RX pins

Jose Figueroa1

Part Number: TMS320F28035
Other Parts Discussed in Thread: C2000WARE

Hello,

I am working on a project and I'm trying to get the Piccolo to send SCI messages from the TX RX pins present on the docking station. I based my code on the Example_2803xSci_Echoback.c of C2000Ware. Am I lacking some configuration?

over 4 years ago

0 Marlyn Rosales Castaneda20 over 4 years ago

TI__Mastermind 25100 points

Hi Jose,

Are you using the standard or ISO version of the controlCARD? Please refer to Ken's response in this thread as it describes the differences between the two controlCARDs and possible hardware connections you may be missing.

What do you observe when you run your code? Is there anything appearing in the terminal?

Best Regards,

Marlyn

0 Jose Figueroa1 over 4 years ago in reply to Marlyn Rosales Castaneda20

Prodigy 130 points

Hi Marlyn,

Thank you for the response, I was using the wrong Pins.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28035: How to get the SCI message from the TX and RX pins