LAUNCHXL-F28379D: Where can I find tutorials and examples for BOOSTXL-SENSORS to use with LAUNCHXL-F28379D

Mahmoud Said Jneid

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Hello everybody,

I have recently got the Delfino F28379D LaunchPad and BOOSTXL-SENSORS, I need some tutorials and examples how to read different sensor signals.

Is there any GUI software like "BOOSTXL-SENSORS_GUI+ET" to monitor BOOSTXL-SENSORS data?

Thank you.

over 5 years ago

0 Santosh Jha over 5 years ago

TI__Guru 50611 points

Hi Mahmoud,

We are trying to contact subject matter expert who can help you, pleas expect response by tomorrow. Meanwhile please take a look at F28379D online line with get familiar with the Launchpadxl-f28379D

training.ti.com/c2000-f2837xd-microcontroller-one-day-workshop-series

0 Gus Martinez over 5 years ago

TI__Mastermind 30511 points

Hi Mahmoud,

The BOOSTXL-SENSORS BoosterPack was designed for MSP430. Unfortunately, there is no GUI support on C2000. It should still be possible to use it with the C2000 LaunchPad, but you will need to 1. ensure the two boards are compatible by comparing header pinouts, and 2. you will need to do some porting of the MSP430 source files to C2000.

It does look like the BOOSTXL-SENSORS only uses I2C and some GPIOs. Therefore, I would suggest you adapt one of the I2C examples located in C2000ware. If you have specific questions about programming I2C or any other questions related to the C2000 LaunchPad, please feel free to post them to the forum.

Below is a related post on the subject.

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/667254?reading-raw-data-Gyro-accel-and-magnetometer-form-BOOSTXL-SENSORS-usning-a-TI-LAUNCHXL-F28377S

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: Where can I find tutorials and examples for BOOSTXL-SENSORS to use with LAUNCHXL-F28379D