• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 233 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28377S: BOOT mode inquiry

Renan Santos Adriano
Mastermind 24655 points
Part Number: TMS320F28377S
Other Parts Discussed in Thread: C2000WARE

Hello Team.

My customer is planning to use TMS320F28377S in their solar inverter design. Need to clarify some queries.

1. While selecting BOOT Mode pins for Boot from SCI, It is preferred to use the SCIA port. After Flashing can they still use SCIA to interface other peripherals. ?
2. While selecting Boot from SCI by boot mode pins, Do they need USB to UART interface to connect with PC? Or any other programmer?
3. How to program with parallel Boot?

Regards,

Renan

  • 0
    TI__Genius 17370 points

    1. They can use SCIA to interface other peripherals as long as they dont interfere with the initial boot function.

    2. No

    3. Refer TRM for detailed information on parallel boot; If you are looking to program the flash, you need to develop the programmer code. you can do that based on sci kernel program (available in C2000ware).