LAUNCHXL-F280049C: buck_F28004x no debuggable cpus

Andreas Jedek

I followed the instruction according file: TIDU986A–September 2015–Revised May 2020 and at Point 4.3.3. page 14 I got the error message after "RebuildProject" : there are no debuggable cpus.

What is a debuggable cpus?

How can I get forward in the Project, able to debug the system?

over 5 years ago

0 tlee over 5 years ago

TI__Guru 62975 points

Andreas,

Can you share a screen capture of CCS when this happens? This issue has not been reported before so there is no quick solution to recommend.

The debuggable CPUs (CPU1 and CLA) can be seen in Step 7 of 4.3.3.

-Tommy

0 tlee over 5 years ago in reply to tlee

TI__Guru 62975 points

Something that may be worth trying is to create a new CCS Workspace so that you are starting from a clean environment.

0 Andreas Jedek over 5 years ago in reply to tlee

Prodigy 60 points

Hi Tommy,

thanks, I did a installation of the driver separately, and now is working.

-Andreas

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F280049C: buck_F28004x no debuggable cpus