TMS320F2812: SWRESET of SCI

Karthik Raveendranath

Part Number: TMS320F2812

Dear all,

We are using SCI peripheral of TMS320F2812. During communication we observe parity errors and want to reset the error flag. It was mentioned in the datasheet that by putting SCICTL1.SWRESET = 1, we can reset the flags. We want to know how much time it will take for the peripheral to recover from the reset (i.e. from SCICTL.SWRESET= 0).

Thanks and Regards

Karthik R

over 4 years ago

+1 Marlyn Rosales Castaneda20 over 4 years ago

TI__Mastermind 26000 points

Hi Karthik,

Unfortunately we don't have an exact value for this specification. However, I believe no intentional delays should be needed after releasing the module reset.

Best Regards,

Marlyn

0 Karthik Raveendranath over 4 years ago in reply to Marlyn Rosales Castaneda20

Intellectual 840 points

Hi Marlyn,

Thanks for the reply.

Regards

Karthik R

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2812: SWRESET of SCI