This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello team,
Our customer is implementing CLB function into their system. Customer is reading TRM, they are not able to understand how to use CLB exactly. Also, they are trying to do analysis of sample code in C200WARE, it is difficult to understand it. Therefore, customer is looking for the document which describes detail information. Can I have your expert's advice/comments on this, please?
As for as I checked it. I believe the following information may be helpful. If there are any helpful URL/documents for CLB, would you share them, please?
https://training.ti.com/c2000-configurable-logic-block-clb-introduction
https://training.ti.com/sites/default/files/docs/ti_c2000_clb_tool.pdf
https://www.ti.com/lit/an/spracl3/spracl3.pdf?ts=1618901562757
best regards,
Miyazaki
Yes, the customer needs to do the https://www.ti.com/lit/an/spracl3/spracl3.pdf?ts=1618901562757 lab from beginning to end, program it in their device, test it and compare it to the solution for it in C2000Ware. That is the best way to learn how to use the CLB.
Nima
Hello Nima,
Thank you for your clarification. I shared this information with our customer.
Best regards,
Miyazaki