LAUNCHXL-F28379D: How to send and receive information of a application running in the LAUNCHXL-F28379D to be used to change parameters or in a dashboard on Matlab Simulink, for example show the signal of a ADC channel in a scope.

Mechelangelo Mancuzo

Prodigy 70 points

Part Number: LAUNCHXL-F28379D

over 7 years ago

0 Yanming Luo over 7 years ago

TI__Guru** 117140 points

You can have a look at below link that might help solve your question. And this thread has been forwarded to The MathWorks team also.
e2e.ti.com/.../484814

0 Brian McKay over 7 years ago

Mastermind 9005 points

You do this with External Mode. Doc link (login may be required)

https://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/external-mode.html

We also have a shipping example:

https://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/parameter-tuning-and-signal-logging-with-serial-external-mode.html

Cheers,

-Brian

0 Mechelangelo Mancuzo over 7 years ago in reply to Yanming Luo

Prodigy 70 points

Dears Yanming and Brian McKa,

I will try to found the solution in the material that you have indicated!

Thank you a lot!

Dears Yanming and Brian McKa,

The tutorial indicated solve my issue.

Thank you a lot!

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: How to send and receive information of a application running in the LAUNCHXL-F28379D to be used to change parameters or in a dashboard on Matlab Simulink, for example show the signal of a ADC channel in a scope.