lwip TCP/IP server & client example code for TMS570LC4357 and HalCoGen setting.

Hi,

Please check out this wiki page for the example.

processors.wiki.ti.com/.../HALCoGen_Ethernet_Driver_and_lwIP_Integration_Demonstration

HI,

Thank you for your reply,

I'm using tcpecho code, I'm configuring concerto(f28m35) as client and Hercules as server(tms570lc4357).
Here client is connecting with the server and it able to send data and sever receiving it.
But server is not replying back. where I need to change in code?
how to send data from server to client. need two way communication.

please give suggestion

Thank you
Basavanagouda

Hi Basavanagouda,
When you said the server is not sending, what do you mean? Is the server not sending or is it sending only zeros?

Hi,

I used echo port number 7, is echoing back. I did change port number to 6000 and try to send some data from the server after connecting to client.

sever able receive data from client it's not replying back.

1. Is there any change  i need to make in code.

Below I'm attaching my code.

kindly walk through and reply

7774.HerculesTCPTest.zip

Thank you

Basavanagouda

Hi Basavanagouda,

 Did you get the webserver example from HalCoGen to work? Not sure if you took the echo server from Mr. Jongsong Kim in the earlier reply as a starting point?

 Our expertise in ethernet echo server is kind of limited. But looking at your code I find that you disable the EMACSwizzleData() in the HL_emac.c. The EMACSwizzleData() is needed for TMS570LC4357 device because there is an errata when writing to the CPPI RAM. LC4357 is a big endian device while you declare the device as little. Please change the __little_endian__ and __LITTLE_ENDIAN__ to 0 and try again and see if it makes a difference. Please go to HL_sys_common.h to change them. 

uint32 EMACSwizzleData(uint32 word) {
    
#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1))
    return word;
#else
    return
        (((word << 24U) & 0xFF000000U) |
        ((word <<  8U) & 0x00FF0000U)  |
        ((word >>  8U) & 0x0000FF00U)  |
        ((word >> 24U) & 0x000000FFU));
#endif
}

Hi,

Thank you I'm able to solve the issue, I did some mistake in code. it's sending and receiving data.

Thank you
basavanagouda.

Hi Basavanagouda,

Glad that your problem is resolved. Do you mind sharing with the community the tips and mistakes you have come across? Is the EMACSwizzleData one of them?

HI Charles,

It's my coding issue, not in EMACSwizzle. I missed callback function.

One more thing i need a suggestion, I'm using TMS570LC4357 development kit I tried code the kit with below links instructions(HALCoGen settings),

http://processors.wiki.ti.com/index.php/HALCoGen_Ethernet_Driver_and_lwIP_Integration_Demonstration

http://processors.wiki.ti.com/index.php/LAUNCHXL2_570LC43:_lwIP_Demo

But board is showing initialization error.

I used the Build demo code from the hercules folder,import the dil file to HALCoGen and i did not change any settings in HALCoGen  and its working fine.

1. Those instruction only for launch pad?

If I search in Google and E2E form i got only those links for my question. I'm thinking those HALCoGen settings only for Launch PAD and not for tms570lc4357 development kit

AM i right?

Please give suggestion,

Thank you

Basavanagouda.

Jongsong Kim said:

this is raw socket echo sample using lwip.

(Please visit the site to view this file)

Hi Kim,

I am using this example on my TMS570LC4357 and it works, but after some seconds (less than one minute) from my PC application (tried with Putty and with a custom labview application) I see the connection is closed. The firmware does not break in echo_error or echo_close function and in Wireshark I don't see FIN/ACK messages.

Any suggestion of what I am missing?

Thank you

Arianna

visit this link for information www.youtube.com/watch