• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 347 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Re: Firmware And Design Files For MSP-eZ430U

Sami NEMER
Prodigy 50 points

Other Parts Discussed in Thread: TUSB3410

Hi,

I need to make virtual rs232 USB communication between the target board (EZ430RF2500T) and the usb port of PC. Is it possible that any one give me firmware and design files MSP-eZ430U (USB Dongle Interface) for that I can do the virtual USB serial communication? Or can any one pleaze give me a simple solution. Please I need your help.

Thanks in advance for any help.

Best Regards.

 

 

 

  • 0
    Expert 1655 points

    Hi,

     

    have a look at MSP430 USB Connectivity Using TUSB3410 (Rev. A) - http://focus.ti.com/lit/an/slaa276a/slaa276a.pdf (pls rfer to the MSP430 Application Notes for .zip-file)

    This application note gives you complete Hardware (incl. Gerber Files) and Software for a TUSB3410 solution.

     

    Rgds

    G**buster

**Attention** This is a public forum