[MSP430FR5729] [Debugger]

RAMESH CHAND

Intellectual 305 points

Other Parts Discussed in Thread: MSP430FR5729, LM3S2965, MSP-FET, MSP-EXP430FR5739, MSP-EXP430FR5969

Hi,

i have to program and debug a board containing MSP430FR5729 controller. I have LM3S2965 CAN Evaluation Board.

Can i use above mentioned Evaluation board to debug the MSP430 Controller Board.

I'm using CCS Version: 6.1.0.00104 IDE.

Any Suggestions will be appreciated.

Thank You,

Ramesh Chand S

over 10 years ago

0 Dennis Eichmann over 10 years ago

Guru 74080 points

Since your CAN board is based on a Stellaris microcontroller instead of a MSP430, I would say: NO.

0 RAMESH CHAND over 10 years ago in reply to Dennis Eichmann

Intellectual 305 points

Hi Dennis,
Thank you for the reply.
i have to use MSP-FET (MSP430 Flash Emulation Tool) or MSP-EXP430FR5739 Experimenter Board for programming and debugging MSP430FR5729, if any other option is there please suggest .
Thank You
Ramesh Chand S

0 Dennis Eichmann over 10 years ago in reply to RAMESH CHAND

Guru 74080 points

You can also use a LaunchPad with eZ-FET like the MSP-EXP430FR5969.

0 RAMESH CHAND over 10 years ago in reply to Dennis Eichmann

Intellectual 305 points

Thank you Dennis for the support.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

[MSP430FR5729] [Debugger]