MSP430I2040: Programming with a TIVA

Sergio Iannace

Intellectual 1520 points

Part Number: MSP430I2040

Hi team,

Is it possible to programme the MSP430I2040 using a TIVA device?

If so, what is the best interface to use? SPI, UART or I2C?

Thanks a lot,

Sergio

over 7 years ago

0 Andre Frantzke over 7 years ago

TI__Expert 5490 points

Hi Sergio,

unfortunately the MSP430I2040 has no BSL, thus programming is done either through JTAG or Custom Solution.

Please have a look at this e2e thread: e2e.ti.com/.../504245

Here's a link the an app note describing "MSPBoot – Main Memory Bootloader for MSP430TM Flash Microcontrollers". http://www.ti.com/lit/slaa600
The communication interface is UART or SPI.

Best regards,
Andre

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430I2040: Programming with a TIVA