SW-DK-TM4C129X: UART DMA program to communicate with CC2564

Bhagyashri Sarda

Part Number: SW-DK-TM4C129X
Other Parts Discussed in Thread: CC2564

Hi,

I am using Tiva C board TM4C129X and CC2564. I want to port a third party bluetooth stack on this setup. For that purpose I need to enable UART DMA.

Is there any code example to communicate between memory and bluetooth chip over urat dma?

Thanks and regards,

Bhagyashri

over 5 years ago

0 Hari Nagalla over 5 years ago

TI__Mastermind 27080 points

As, such you should be able to get an example of UART DMa from 'TI Explorer' in the Code Composer Studio. There is no thing specific to Bluetooth UART DMA.. Since, you intend to use 3rd party BT stack, ensure that the stack's read/writes are integrated with uDMA.

Thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

SW-DK-TM4C129X: UART DMA program to communicate with CC2564