MSP430FR2522: msp gang interactive mode programming clear example

Hi please refer this 

MSP430_GANG_BSL.pdf

This is good but not what we need.

I am asking what sequence will program a target without wearing out the memory using the dll..

e.g
LONG MSPGANG_Set_MCU_Name(LPTSTR name);

LONG MSPGANG_SetConfig(LONG index, LONG data) // interface  

LONG MSPGANG_SetTmpGANG_Config(LONG no, LONG data) // 

LONG MSPGANG_SetConfig(LONG index, LONG data) // power

LONG MSPGANG_SetConfig(LONG index, LONG data) //voltage range

LONG MSPGANG_SetConfig(LONG index, LONG data) // target masks.. etc.

LONG MSPGANG_Interactive_Open_Target_Device(LPTSTR name)

LONG MSPGANG_Read_Code_File(LPTSTR FullPath)

LONG MSPGANG_SelectImage(LONG lImage)

LONG MSPGANG_CreateGangImage(LPTSTR name)

LONG MSPGANG_LoadImageBlock(void)

LONG MSPGANG_VerifyPSAImageBlock(void)

LONG MSPGANG_InteractiveProcess(LONG timeout)

LONG MSPGANG_Interactive_Close_Target_Device(void)

Hi Aaron

Do you want to write the application program plus some individual ?

Could you tell more about details about what you want?

Best regards

Gary

yes. c# program to do all the things.

Still no clear way of programming without wearing out the MSP gang memory.

Hi

You can refer to the MSPDS for more details about this topic

http://www.ti.com/lit/ug/slau656b/slau656b.pdf

Thanks,

So Stop using MSPGang and use MSP-FET.

Aaron

Sorry for the misunderstanding about this issue.. I know the msp-gane is using the Gang430.dll and MSP-GANG.dll not the msp430.dll. So you just want to know how to use the MSP-GANG.dll, right? I saw in the MSP-GANG's user guide it include the description about the Dynamic Link Library for MSP-GANG, also it have mentioned some examples to show how to use the Gang430.dll and MSP-GANG.dll in the MSP-GANG install path

C:\Program Files (x86)\Texas Instruments\MSP-GANG\Examples

Does that example code help you?

Hi Aaron

First example works with C#. But if you want exactly interactive mode – it is the next example – Cpp-Interactive….

All examples have the open source code. You can open Cpp-interactive and modify the C# example usin as the pattern the Cpp-Interactive… There no big difference between these examples.