CCS/MSP430FR2311: 2-Wire JTAG Schematic

Venkatesh

Tool/software: Code Composer Studio

Hi,

This is the schematic of 2-Write JTAG Communication in my target board. I have used "MSP430 Hardware Tools User's Guide (Rev. AF)" as guide. Will this do the job?

I have filter/bypass capacitors in main circuit.

over 5 years ago

0 Dietmar Walther over 5 years ago

TI__Genius 14165 points

Hi Venkatesh,

schematic is correct but the cap on RST pins is too big it should not be larger than 2.2nF if you want to use SpiBiWire.

This is also shown in the document you pointed to.

0 Venkatesh over 5 years ago in reply to Dietmar Walther

Prodigy 100 points

Hi Walther,

Thank you very much for pointing out the capacitor. I did know that capacitor should be between 0.1nf to 2.2nF. I messed up when I copy pasted capacitor.

Regards,

Venkatesh

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430FR2311: 2-Wire JTAG Schematic