help, MSP430FR6989 launchpad deverlopment UART

Huu Lam Pham

Intellectual 845 points

i have just received this kit, but I do not know how to configure the uart for this module.

I found the Backchannel, but I want to enable the uart P4.3 and P4.2.

Anyone here can help my to configure this UART? Or share me the code or tutorial or something???

Thanks.

over 10 years ago

0 Sunil Oak over 10 years ago

TI__Mastermind 49120 points

Moving to the right forum.

0 Huu Lam Pham over 10 years ago in reply to Sunil Oak

Intellectual 845 points

which forum! sorry about this!

0 Sunil Oak over 10 years ago in reply to Huu Lam Pham

TI__Mastermind 49120 points

I moved the post already. Someone from the MSP430 support team will answer soon.

0 old_cow_yellow over 10 years ago

Guru 58965 points

Huu Lam Pham said:
... I found the Backchannel, but I want to enable the uart P4.3 and P4.2. ...

Why the uart P4.3 and P4.2? Why not the uart P2.1 and P2.0 that is right across the river from the Backchannel?

0 Huu Lam Pham over 10 years ago in reply to old_cow_yellow

Intellectual 845 points

Because i want to communicate with the other kit.

0 sgspecker over 10 years ago in reply to Huu Lam Pham

TI__Intellectual 2765 points

Here's a wiki page that provides a UART example for the FR6989. This example works for the backchannel UART or when connecting between devices (tested between two LaunchPads).

http://processors.wiki.ti.com/index.php/MSP_UART

There are some other examples which can be found in the specific device and Driver Library examples of MSPWare ().

Take Care,
Scott

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

help, MSP430FR6989 launchpad deverlopment UART