FET430UIF WIN10 Driver

James6389

Other Parts Discussed in Thread: MSP-FET

Hello,

I use MSP430UIF Debugger, and my OS is WIN10, but it seems that MSP430UIF can't install correct drive on WIN10, Does MSP430UIF support WIN10? Can you provide WIN10 driver for MSP430UIF.

Thanks!

over 9 years ago

0 Ryan Brown1 over 9 years ago

TI__Guru**** 219597 points

Hello James,

MSP-FET430UIF support on Windows 10 definitely seems possible, but with mixed results: e2e.ti.com/.../452734

Let me know if this previous thread with the included driver solves your problem, otherwise you might want to look into the MSP-FET as this is the official MSP430 flash emulation tool now supported by TI.

Regards,
Ryan

0 James6389 over 9 years ago in reply to Ryan Brown1

Prodigy 185 points

Hi，Ryan，

I use IAR for MSP430 V4.21.2, and i do it as you mentioned,but it still can't work. when i download the project, it pop up below dailog.

0 Ryan Brown1 over 9 years ago in reply to James6389

TI__Guru**** 219597 points

Hi James,

The MSP-FET430 UIF should enumerate on your system as an Application UART and Debug Interface under COM ports. Please check your device manager and see if this is the case, if so then the your IAR version might not support Windows 10.

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

FET430UIF WIN10 Driver