MSP430FR2633 programming/debugging

artem dmitriev

Other Parts Discussed in Thread: MSP430G2553, MSP430FR2633, MSP-EXP430F5529LP, MSP-FET

Hello. I make a custom board based on MSP430FR2633 controller. I'd like to know, how can i program/debug the code? Is it possible to use J-Link EDU? Also i have Launchpad with MSP430G2553. Can i use this board like a programmer/debugger?

over 9 years ago

0 Dennis Eichmann over 9 years ago

Guru 74080 points

Hi Artem!

For MSP430 programming & debugging you will need a MSP-FET or a LaunchPad with eZ-FET (lite) like the MSP-EXP430F5529LP. The MSP-EXP430G2 LaunchPad does not (officially) support the MSP430FR2633.

Dennis

0 zrno soli over 9 years ago

Guru 34533 points

artem dmitriev said:

Also i have Launchpad with MSP430G2553. Can i use this board like a programmer/debugger?

G2 LP can be used as BSL hardware (with BSL Scripter on PC) for FR device.

www.ti.com/cn/lit/pdf/slaa535

0 Dennis Eichmann over 9 years ago in reply to zrno soli

Guru 74080 points

But unfortunately not for debugging. For programming only it might be sufficient, of course.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2633 programming/debugging