MSP432P401R i2c interface Dual 12 bit Dac AD5697R

madhu kumar

hello,

i am beginner MSP432P401R, which source code refer for msp432p401R interface with 12 bit DAC (AD5697R) using i2c or how to implement msp432p401r i2c with AD5697R.

over 9 years ago

0 Ryan Brown1 over 9 years ago

TI__Guru**** 218067 points

Hello Madhu,

There is no example code designed specifically for I2C communication between the MSP432P401R and the AD5697R. You will need to start with the MSP432P401R Technical Reference Manual's I2C chapter and code examples already available and modify them to form a communication interface like that outlined in the AD5697R datasheet. Here is a getting started guide: e2e.ti.com/.../msp-i2c-getting-started-guide

Regards,
Ryan

0 madhu kumar over 9 years ago in reply to Ryan Brown1

Prodigy 70 points

hello Ryan,

there is no example code designed specific part number AD5697R. but MSP432P401R i2c interface with any other peripheral device (12 bit DAC)
pleas send the code examples

0 Ryan Brown1 over 9 years ago in reply to madhu kumar

TI__Guru**** 218067 points

Hi Madhu,

MSP432P401x Code Examples package: www.ti.com/.../slac698

Or you can use a Driverlib example: software-dl.ti.com/.../MSP432_DriverLib_3_10_00_09.zip

With slight modification the master I2C examples can be used to control a peripheral device. You can also find an example from the community using a different slave device.

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432P401R i2c interface Dual 12 bit Dac AD5697R