• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 458 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/MSP432P4011: TI Drivers Power_init() don't return

MSP432P4011: TI Drivers Power_init() don't return

Tomasz Kocon
Guru 26200 points

Part Number: MSP432P4011

Dear TI, 

I do not have MSP-EXP432P4111 to recreate issue solved by Pierre in this thread: e2e.ti.com/.../743664
Could someone try to recreate this issue?

  • 0
    TI__Guru 70831 points
    Tom,
    I would recommend looking into how the wait-states are applied. This device (P4011) has a slightly different flash configuration and if the project symbols have not been updated from the MSP432P401R to the MSP432P4011, then the wrong wait-states will be applied in PowerMSP432.c .

    Regards,
    Chris
  • 0 in reply to Chris Sterzik
    Guru 26200 points
    Chris,
    according to what Pierre has did, the issue should be related to the code, not to the data and its defaults.
    Having no access to MSP-EXP432P4111 right now, and also to Pierre code, I wait for his response.

**Attention** This is a public forum