MSP432P401M: Debugging using USB

Hello Lakshminarayana,

The MSP432P401M does not have a USB peripheral.

You can use JTAG or Bootloader (which use serial peripherals like UART).

Thanks,

Sai

Lakshminarayana said:

Where can I find the LaunchPad of this?

here is the LaunchPad.

Lakshminarayana said:

Also Reference Design?

Not sure what you are asking here.

Lakshminarayana said:

GPIO pins of MSP432 are multiplexed right (Digital and analog).

The GPIO pins of MSP432 are multiplexed but not sure what context you are asking this question in.

Before you make any design choices (Software and Hardware), please refer the TRM/Datasheet as not all pins are multiplexed the same way.

Thanks for your quick reply :D

Yes I have looked into the data sheet.

I was asking whether Any of the GPIO can be used for serial Interfaces like SPI/I2C?

I think you forgot to attach the Launchpad link.

Hello Lakshminarayana,

Lakshminarayana said:

I was asking whether Any of the GPIO can be used for serial Interfaces like SPI/I2C?

As mentioned earlier this information is present in the TRM/Datasheet, as to which GPIO is multiplexed with what functionality. So not sure what you are asking here.

Lakshminarayana said:

I think you forgot to attach the Launchpad link.

Yes my mistake. Here is the link: http://www.ti.com/tool/MSP-EXP432P401R. We don't have a launchpad for the exact MCU that you are using.

Thanks,

Sai