MSP432P4011: Errno behavior when a number divided by 0

The following setting in the .cfg determines what happens when you divide by zero 

/*
 * Enable hardware exception generation when dividing by zero.
 *
 * Pick one:
 *  - 0 (default)
 *      Disables hardware exceptions when dividing by zero
 *  - 1
 *      Enables hardware exceptions when dividing by zero
 */
m3Hwi.nvicCCR.DIV_0_TRP = 0;
//m3Hwi.nvicCCR.DIV_0_TRP = 1;

If the above '1', an exception occurs and the application terminates. No changes are made to errno.

If the above '0', an excepption does not occur. I believe the result is 0, but please confirm with the ARM standard. Again, no changes are made to errno.

Todd