enet_uip and enet_io

Cuong Mai Manh Khanh

I use Connected LaunchPad 129, and try download 2 project.
enet_uip: I can ping
enet_io: not response.

Then use noip.com and NAT my modem to make these web to the world.

enet_uip: work well
enet_io: cannot load the web, when i ping the web, has response.

I don't know why? and anyone have solution ?

Thanks :)

over 11 years ago

0 Cuong Mai Manh Khanh over 11 years ago

Prodigy 110 points

Hi, had anyone try this ?

0 Amit Ashara over 11 years ago in reply to Cuong Mai Manh Khanh

TI__Guru**** 244440 points

Hello Cuong,

I just tried the same on my TM4C129 Connected LaunchPad. After downloading the default code, I opened TeraTerm and got the IP address. The used the IP address on my FireFox browser and I was able to control the toggle of IO's and Blink Led Rate.

Are you using the same default program or have you modified the program.

Regards

Amit

0 Cuong Mai Manh Khanh over 11 years ago in reply to Amit Ashara

Prodigy 110 points

Hi Amit Ashara,

Yes, It works. But just in LAN

I want to cnnect it when i go out. So I regen: https://www.noip.com/
And NAT port modem to IP of Connected LaunchPad.

---
with

- enet_uip: worked.

-enet_io: cannot work.

0 Amit Ashara over 11 years ago in reply to Cuong Mai Manh Khanh

TI__Guru**** 244440 points

Hello Cuong,

I am not familiar with noip, but can you try connecting using the IP Address instead of the domain name?

Regards

Amit

0 Cuong Mai Manh Khanh over 11 years ago in reply to Amit Ashara

Prodigy 110 points

HI Amit,

I want to connect my launchpad by Internet not just in LAN
Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

enet_uip and enet_io