This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2510-Q1: Shutdown mode and STB mode

Part Number: DRV2510-Q1

Hi team

I would like to ask a question about DRV2510Q1 shutdown and standby mode.

When the device is active, the EN=1 and STB=0.

If we would like to let the device enter the shutdown mode, could we just let EN=0 and leave the STB alone whether it is 0 or 1? Or must STB be 0 when we only want the device enter into shutdown mode?

 

Since in datasheet work mode description, we only see the shutdown and standby mode only related to EN and STB respectively, we want to know if we need shutdown mode, what value should we configure about the STB?

In another way to say, please correct me if my understanding is wrong:

Shutdown mode:    EN=0, STB=0;

Standby mode: EN=0, STB=1.