DRV8308: All Registers setting issue

Allen Lu

Part Number: DRV8308
Other Parts Discussed in Thread: MCT8316A, MCF8316A

hi team:

My customer feedback that after the software corresponding to the EVM board of the motor driver chip is opened, it fails to modify the SPDMODE setting after opening the All Registers page. This item cannot be set to any other value. If it is changed to 0, it will automatically change back to 1, would you help to take a look? tks !

over 1 year ago

0 Andrew Liu over 1 year ago

TI__Mastermind 18916 points

Hi Allen,

Our team will aim to provide an updated response either by tomorrow or early/mid of next week

Thanks and Best Regards,
Andrew

0 Vishnu Balaraj over 1 year ago

TI__Mastermind 24405 points

Allen,

We have very limited support on DRV8308. What is the end application and the current level for this application? I can suggest alternate parts based on the end application and current level.

Regards,

Vishnu.

0 Allen Lu over 1 year ago in reply to Vishnu Balaraj

TI__Intellectual 1670 points

Hi Vishnu.

The customer use DRV8308 in ATM EE, do you have another alternate part is recommended? tks in advance.

0 Vishnu Balaraj over 1 year ago in reply to Allen Lu

TI__Mastermind 24405 points

Allen,

Is the customer open to devices with integrated FETs? We have MCF8316A and MCT8316A. Both are single chip code-free sensorless, fully integrated solutions.

https://www.ti.com/product/MCF8316A

https://www.ti.com/product/MCT8316A

Regards,

Vishnu