MCT8316AEVM: Regarding GUI issue

Daisuke Higa

Part Number: MCF8316AEVM

Hi support team.

I had a question regarding GUI from my customer.

We followed the setup steps shown in the GUI and found that when I clicked the settings button shown in the figure below, Fault was detected and the motor could not be controlled.

I could control the motor without any problem without clicking the button.

I compared the register settings before and after clicking the button, I confirmed the change in the register settings like the attached Excel file.

Why are these changes made?

Especially because the register setting that is "RESEVE" has changed.

We suspect it's a GUI errata.

Best regards,

Higa

MCT8316A GUI analysis.xlsx

over 3 years ago

0 Eric Chen over 3 years ago

TI__Genius 9220 points

Hi Higa-san,

Thanks for reporting this GUI issue. This is indeed a bug in the GUI code. I've fixed this and published a newer MCT8316A GUI v1.1.4

Please let me know if you encounter any other issues.

Thanks,
Eric C.

+1 Eric Chen over 3 years ago in reply to Eric Chen

TI__Genius 9220 points

Just to clarify, this GUI error was present on the MCT8316A_GUI v1.1.3, not the MCF8316A_GUI.

I've updated the post title to reflect this.

Regards,
Eric C.

0 Daisuke Higa over 3 years ago in reply to Eric Chen

Genius 4315 points

Hi Eric-san

Thank you for your prompt reply and kind support.

I'm sorry my mistake about product name.

Thanks.

Higa

0 Eric Chen over 3 years ago in reply to Daisuke Higa

TI__Genius 9220 points

Hi Higa-san,

You're very welcome. Please let me know if you have further issues with the GUI.

Regards,
Eric C.

Motor drivers

Motor drivers forum

MCT8316AEVM: Regarding GUI issue