stm32 pwm signal
drv output is not propperly
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Veerapandiyan,
Could you please clarify what is being measured on the waveforms? Is it the GHx pins, etc.? Also for your first waveform, what is the V/div time scale?
Best,
~Alicia
Hi Alicia Rosenberger,
first one is stm32 pwm output 120 degree phase shift input INLA,INLB,INLC, perfect output GLA,GLB,GLC, perfect working but INHA,INHB,INHC, perfect input but GHA,GHB,GHC, output is not working how to solve the issue
Hi Veerapandiyan,
Today is a holiday for TI in the US, we will aim to provide a response by the end of the week.
Regards,
Anthony
Hi Alicia Rosenberger,
6 pwm mode
I have another thread open link:
please visit the page
Thanks Regards,
VJ.Pandi
Hi VJ.Pandi,
It looks like the other thread that you have open is regarding this same issue, so I am going to close this thread for now and continue the support there.
Best,
~Alicia
Hi Alicia Rosenbenger,
ok mam. close this thread for now and continue the support there.
Best,
VJ.pandi