• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 125 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8106-Q1: Can I depop HS FET and use as a LS driver?

David Shumate
Expert 7055 points
Part Number: DRV8106-Q1

Hi Team,

My customer is interested in using the DRV8106 as just a lowside driver. Will the part allow us to remove the highside FET (or replace with a diode or resistor) and use as just a lowside driver?

If so, can you clarify what we would need to adjust in hardware/register settings to achieve this?

Best,

David

  • 0
    TI__Mastermind 36515 points

    Hi,

    Thank you for your question.DRV8106-Q1 can be used as lowside driver. High side FET can be removed.

    - Recommend not turning on high side gate driver. Therefore stay upper 2 states only.

    - Recommend to have external diode. Either "solenoid load" or "resistive load with long wiring", we need discharge path for the energy in inductor.

    regards

    Shinya Morita